OSHA 10 Certification is an important step for any worker. It not only allows them to work in a safer environment, but it also provides them with the necessary credentials that employers are looking for.

How to Take the OSHA 10 Training

This certification has a number of benefits for the individuals who are certified. They can take advantage of job opportunities that are more rewarding, have increased salary potential, and have better chances.

This certification is an important step in your career as a worker. It ensures that you have the skills and knowledge needed to be safe on the job. In addition, it will give you an edge over other workers and make it easier for you to find a new job or advance your career.

If you want to take this training, here is what you need to know...



What Is OSHA 10 Certification?

OSHA stands for the Occupational Safety and Health Administration. They are the federal government organization that oversees safety regulations. OSHA 10 is part of OSHA’s outreach program intended for those entry-level workers with the intention to promote health and safety in the construction and general industry.

The certification training tackles topics such as workplace hazards, employer responsibilities and filing complaints to OSHA with regard to matters in safety.

This certification is required for many industrial workers, staff and operators in industries like manufacturing, construction, and mining. Unlike other safety certifications, OSHA 10 certification is designed to be given to general workers as well as those workers on construction sites.

Anyone who completes the 10-hour course can receive this certification. They do not need to have any previous safety experience or training.



How to Obtain OSHA 10 Certification?

The first step towards obtaining OSHA 10 certification is to find a course provider. These are likely to be located near the worksites where you’re working.

If you’re presently employed, it is the responsibility of the employer to provide such training to their workers. The training can be done on-site or off-site.

On the other hand, if you’re not employed and just want to obtain this certification an online course is available. Online is convenient to take the training from as long as you have internet access. If you’re looking for an online training provider, the list of training schools and providers is mentioned below.

Once you’ve enrolled in the course, you’ll receive a digital certificate. You’re also required to pass a short quiz at the end of the course. This is to verify that you’ve actually completed the course rather than just reading through it.

The 10-hour course includes topics such as:

  • What are the different types of hazards?
  • What are some of the regulations that apply to your job?
  • How can you protect yourself from hazards?
  • How can you prevent hazards from happening?
  • How do you report a hazard or injury to your employer, supervisor, or union representative?
  • What should you do if someone is hurt on the job?
  • Is there anything else I should know about my job and how it affects my health and safety?



Training Schools and Online Training Providers

  • Riverland Community College
    1900 8th Avenue NW, Austin, MN 55912 — 507-433-0600
    965 Alexander Drive SW, Owatonna, MN 55060 — 507-455-5880
    2200 Riverland Drive, Albert Lea, MN 56007 — 507-379-3300

  • Creation World Safety
    19401 So. Vermont Ave. Suite A-108 Torrance, CA 90502
    Phone: (310) 538-1297

  • ClickSafety
    Burlington, MA 01803

  • UL Solution
    USF OTI Education Center, 2612 Cypress Ridge Blvd. Suite 101, Westly Chapel, FL 33544
    Phone: (813) 994-1195

  • ESA National Training School
    2222 South Service Road, Ste. 230, Dallas, TX 75261
    Phone: 888-447-1689

  • American Safety Council
    225 East Robinson Street, Suite 570, Orlando, FL 32801
    Phone: 1-800-393-1063

  • College of Continuing Studies UA SafeState
    Box 870310, Tuscaloosa, AL 35487-0310
    Phone: (855) 517-3347

Online Training Providers are:

  • OSHA Education Center
    Phone: 1-800-586-3784
    Vector Solution
    4890 West Kennedy Blvd, Suite 300 Tampa, FL 33609

  • At Leisure Contractor Licensing
    Contact: 617.600.4315

  • H.S.I
    9595 Six Pines Dr, Suite 6305, The Woodlands, TX 77380
    6136 Frisco Square Blvd Ste 285, Frisco, TX 75034
    4 CityPlace Dr., Ste 450, St. Louis, MO 63141
    4435 Waterfront Drive, Suite 300, Glen Allen, VA 23060
    Call 800-447-3177

When enrolling or registering in a course, specify which type of OSHA 10 course you need. There are two (2) of them: the construction industry and the general industry. Those are two different courses.



Who Needs OSHA 10 Certification?

OSHA 10 certification is required for certain jobs in the construction and general industries. Entry-level workers in these industries are encouraged to take the training. Those workers who don’t have supervisory responsibilities are not required to take this.

To receive certification, you must take and complete the training course. This can be taken in-person or online. It only takes less than a day to finish the course. Upon completion, you will receive a certificate and DOLE card, which is going to be issued and will be mailed to your registered address.

If you complete OSHA 10 in construction, the DOL card you’re going to receive is yellow while for the general industry is blue. These cards are proofs that you’ve successfully completed a training course and credentials you can show to your employer.

What jobs can you get with OSHA 10 certification? Here are some of the workers who might need it:

  • Boilermakers
  • Carpenters
  • Electricians
  • Carpet Layers
  • Ironworkers
  • Insulation Installers
  • Forklift operators
  • Linemen
  • Elevator Mechanics
  • Fencers
  • Landscapers
  • Heavy Equipment Operators
  • Laborers
  • Painters & Decorators
  • Plasterers
  • Tile Workers
  • Dredgers
  • Sheet Metal Workers
  • Masons and Stonemasons
  • Welders
  • Plumbers
  • Truck Drivers
  • Millwrights
  • Pipefitters
  • Pile Drivers

If you work as an entry-level worker in manufacturing, healthcare, warehousing, mining, agriculture, logistics, storage, and distribution in industries, you need general industry OSHA 10 training.



Benefits of Being Certified

The obvious benefit of OSHA 10 certification is that you’ll be able to get an entry-level job since employer prefer those candidates with such credentials.

With your OSHA 10 certification, you can start working in the field as soon as you are hired. Other benefits of having an OSHA 10 certificate on your resume include the following:

• A higher salary than other entry-level workers
• More rapid advancement and increased responsibility
• Better, higher-paying job opportunities

From the employer point of view, some of the benefits that can be reaped from giving this training to the workers are:

• Promotion of safety and health practices among workers
• Reduced workplace accidents thus less insurance premiums
• Reduced lost time injuries and other incidents in the workplace
• Boost workers’ morale
• Efficient workers and better quality of work
• Increased workers’ safety awareness
• Promotion of safety culture

Requirements for OSHA 10 Certification

To be eligible for OSHA 10 certification, you must be at least 18 years old and be able to communicate in English. You also must be able to read and understand basic instructions written in English. You cannot have any felony convictions on your record.

Finally, you must be able to pass a drug test. There are no educational requirements for OSHA 10 certification. However, there are some prerequisites. You must be employed at the worksite where you intend to use the certification.

You must be supervised by a person who has completed the course. You must also work with a certified safety professional who has completed the course.



Limitations of This Certification

You must complete and pass the course within 30 days of being hired for a job where OSHA 10 certification is required.
Once you’ve passed the course, you’ll receive a digital certificate that you must keep on file at the worksite. There are no required continuing education courses to maintain your OSHA 10 certification.

However, in order to use it on the job, you must be supervised by a certified safety professional. There are some limitations to your OSHA 10 certification. You’re allowed to inspect and make recommendations regarding health and safety issues only at your own worksite. You’re not allowed to travel to another facility or inspect any other worksites.

You also are not authorized to make any recommendations or take any actions regarding any other hazards or hazards related to other federal regulations.



Can You Fail Certification Test?

I would like to mention the difference between a certification and a certificate. Certification involves passing the exams in the training process while a certificate doesn’t have any testing.

When you complete the OSHA 10, the only thing you will be given is a certificate or a DOL card. Earning these credentials doesn’t involve undergoing a written test or an exam and therefore OSHA 10 is not a certification – it is just a mere certificate as other outreach of OSHA. To answer the question if you can fail OSHA 10 – no exams is in this training.

However, depending on the training standard of the school, an exam may be administered. The questionnaire may have 50 items and examinees are required to answer correctly at least 75% of the questions. If you’re going to enroll or register in a course, inquire with the training provider involved in passing the test.

How long is the Certification Good For

OSHA 10 certification is good for three or five years depending on the state where you applied in. You must complete a refresher course to keep your certification. If you live in the states of Connecticut, Miami, and Philadelphia refresher must be taken in 5 years.

There are no required hours of continuing education for this certification. You can also elect to take a different course to renew your certification if desired.

We would like to remind you that OSHA 10 training and refresher are voluntary since it part of the OSHA’s Outreach Program.



What Jobs Can You Get with OSHA 10 Certification?

OSHA 10 certification is a requirement for many jobs. These include jobs like construction, manufacturing, and engineering.

There are many job roles that require OSHA 10 certification. For example, most construction workers need to be certified before they start their job. This includes electricians, plumbers and carpenters.

The reason for this is because these types of jobs are known to have high risks of injury or death on the job site and sometimes at the workplace itself.

The 10-hour OSHA course is appropriate for employees who need to understand the basics of occupational safety and health regulations. It is also appropriate for those who need to learn about safe work practices in their own workplace or at a specific job site.


There are only about 1500 people in the world who currently hold this certificate. If you’re ready to take the next step with your career and become one of that exclusive group of safety professionals, read on to learn more about getting this certification.

It’s a good place to start your career in the safety management industry.

Get Your Forklift Certificate Today